Fence post 60 × 40 × 1.5 mm with cover strip and stainless steel fasteners
The fence post is equipped with a cover strip and a mounting system for fence panels. The panels are secured using rivet nuts installed in the post and stainless steel screws, ensuring a durable, corrosion-resistant connection between the components. The spacing between fixing points on the post is 200 mm.
The cover strip conceals the fastening elements, improving the appearance of the connection between the panel and the post. The system provides stable installation of 2D and 2DS fence panels while ensuring a clean, aesthetically pleasing finish for the entire fence.

Technical specifications
- Rectangular cross-section: 60 × 40 × 1.5 mm;
- Post embedment depth: 400-800 mm below ground level, or installation using a base plate;
- Post height: 1.300-2.600 mm;
- Cover strip height: 830-2.030 mm;
- Fixing point spacing: every 200 mm;
- Rivet nuts pre-installed in the post;
- Spacer washers;
- Stainless steel screws.
Fence posts with cover strips are also available in corner versions.
Surface protection


